FCC Part 68
The FCC requires that you connect your cordless telephone to the nation- wide telephone network through a modular telephone jack {USOC AJ 11C, AJ11W or AJ14).
Your telephone company may discon- tinue your service if your equipment causes harm to the telephone network. They will notify you in advance of
disconnection, if possible. During notification, you will be informed of your right to file a complaint with the FCC.
This equipment may not be used on coin service provided by the phone company or Party Lines.
The REN is useful in determining the number of devices you may connect to your telephone line and still enable the devices to ring when you receive a call. The general rule is that the REN value should not exceed 5.0A total; however, contact your local telephone company for the specific number in your area.
Occasionally, your telepnoone com- pany may make changes in its facili. ties, equipment, operation, or proce- dures that could affect the operation of your equipment. If so, you will be given advance notice of the change to
IC (Industry Canada)
This telephone is registered for use in Canada.
Notice:The REN assigned to this device denotes the number of devices you may connect to
+
give you an opportunity to maintain
uninterrupted service.
The base unit'contains no user serv- iceable parts. The handset contains a user replaceable battery pack.
If it is determined that your telephone equipment is malfunctioning, the FCC requires that it not be used and that it be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the m~nufacturer or its authorized agents or by others who may be authorized by the FCC. For repair procedures, follow the
instructions outlined under the AUDIOVOX Limited Warranty.
the telephone loop, which is used by the device to prevent overloading. The termination on a loop may consist of any
combination of devices
subjected only to the requirement that the sum of the REN does not exceed five (5.0)
Notice:The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain
telecommunications network
protective. operational and
safe1y requirements. The
Department does not guarantee the equipment will
operate to the user's satisfaction.
5
OT94102.p65
6124198.12:20 PM
.@-
