Call Waiting
CALL WAITING is a subscription service, available from most local telephone service providers. Contact your provider for details. While you are on a call, you will hear an alert signal, warning that a second caller is trying
to reach you. | ..:. |
If you subscribe to this service linked with CALLER ID (CID), the name and/ or phone number of the second caller can be displayed on the Handset immediately after hearing the CALL WAITING alert. For more details, see CALLER ID (CID).
Switching calls using FLASH
.To switch over to the new call,
press the@:!5]key; the first call is put on hold.
.To switch back to the first call,
press the @:!5] key again.
First, dial the call normally. Then activate the Temporary Tone feature by pressing TONE (the * key). You can then press the numbers or symbols you need, and your phqne will send the proper signals.
To end the call, press @) or place the handset back in the base. The phone will automatically go back to rotary (PULSE) service.
Programming Ringer .
I
~
The handset ringer is capable of four different types of ringer tones. The following sections detail how to select different ringer types and how to turn off the handset ringer.
Temporary Tone
If you have rotary (PULSE) telephone service (TONE/PULSE switch is set to PULSE), this feature allows you to temporarily switch to TONE dialing for such purposes as remote access to
answering machines,
22
DT94102.p65 | 22 | 6/24/98. 12:20 PM |
|
|
rF
