Audiovox DT 941 CI manual SET Announce Onlyh

I

-@I-

Set Announce		Only
.Press	the~	key 5 times		until
you	hear:	"SET	ANNOUNCE
ONLYH
Now	press	~	.The	voice
prompt will say either OFF or ON.
Repeated		presses	of SELEC1;;:will
alternate between ON and OFF:
The Base Unit will display either
ON or OF (off) to reflect your
choice.

Choose OFF if you want your DT 941 CI to record your callers'

messages (Nbrmal Answering Mode).

Choose ON if you only want your callers to hear your greeting with- out allowing them to leave you a message (Announce-Only Mode).

Once you've selected OFF (or ON), press (TIME/SET) to confirm your selection. The voice prompt will say: "ANNOUNCE ONLY IS OFF (or ON)".

Set Outg~essage		1
.Press	~	until you hear "Set
Outgoing Message".
.Press	~.	The voice prompt
will say "Now Recording", followed
by	a tone.

.Begin speaking after the tone, towards the front edge of the Base Unit. The Base Unit display be- comes a timer as you record your outgoing message.

.Your outgoing message must be

longer than 2 seconds.

	MENU
--	..
<OC>
	MEMO
-~
o	-~I
)
	PLAY/STOP

.When done, press (PLAY/STOP1.

Your outgoing message will auto-

matica"y be played back.

You can now program the other 6 functions.

32

DT94102.p65 32 6124/98. 12:20 PM

-@-