GX2401c I/B version 09050A-1
the
DISCHARGING
1.Unplug the telephone line cord from the GX2401c.
2.Make sure that the adapter is connected.
3.Lift the handset out of the base cradle.
4.Press the TALK button of the handset and start discharging.
Once the symbol |
| LOW appears on the LCD Display, it means that the battery level is | |
|
|
|
|
low. Let it fully discharge for 12 hours. Once the
CHARGING
1.Make sure the adapter and telephone line cord are connected to the GX2401c.
2.Place the handset on the base cradle. The CHARGE indicator of the base unit will light steadily.
3.Leave the handset charging on the base for 20 hours continuously to get a maximum charge.
4.The GX2401c is now ready for regular use. Discharge and charge the
TECHNICAL INFORMATION
This cordless phone uses radio frequencies to allow mobility. There are certain difficulties in using radio frequencies with a cordless telephone. while these are normal, the following could affect the operation of your system.
NOISE: Electric pulse noise is present in most homes at one time or another. This noise is most intense during electrical storms. Certain kinds of electric equipment such as light dimmers, fluorescent bulbs, motors, and fans also generate noise pulses. Because radio frequencies are susceptible to these noise pulses, you may occasionally hear them in your handset. Generally, they are minor annoyances and should not be interpreted as defects in your system.
RANGE: Because radio frequencies are used, location of the base unit can affect operating range. Try several locations in your home or business and pick the one that gives you the clearest signal.
INTERFERENCE: Some electronic devices operate in and/or generate interference near the operating frequencies of your cordless telephone. while several protection circuits are used to prevent unwanted signals, there may be periods when these unwanted signals cause interference. If interference occurs frequently, it can be minimized or eliminated by lowering the height of your base antenna or by relocating the base unit. You can check for interference before selecting the final base unit location by plugging in the phone.
TROUBLESHOOTING
A. TELEPHONE UNIT TROUBLESHOOTING TABLE
Symptoms |
|
| Possible Solution / Cause | |
No dial tone |
| ∙ | Check that the telephone line cord connectors at both ends | |
|
|
| are pushed in firmly until they click. | |
|
| ∙ If you had a power failure or had unplugged the base unit, | ||
|
|
| replace the handset on the base unit for two to five seconds | |
25 |
|
|
| |
OWNER’S MANUAL#GX2401c | ||||
| PAGE: | 25 | English version | |
