Audiovox MVS6950 manual Radio Operation

RADIO OPERATION

Tuning into a station manually

1.Press FUNCTION button until the frequency

band appears on the display.

2. Press the BAND button to select the desired band.

3. Press the TUNING button to tune in the desired station.

FM Stereo

Press the FM MODE button on the remote

until " " appears on the display.

Weak FM stations

Press the FM MODE button on the remote

until the " " word appears on the display. Background noise will be reduced but the signal reproduced will be mono. To restore stereo reception, press the FM MODE button on the remote to select STEREO.

To search for a station automatically

Hold down the TUNING buttons on the remote or SKIP buttons on the front panel for 1 to 2 seconds, and a station is searched for automatically. After tuning in a station, the search stops.

The search may not stop at a station with a very weak signal.

Presetting stations

You can tune into a stored station directly by entering the preset number. 20 stations on FM band can be preset.

20 stations on AM(MW) band can be preset.

1.Press FUNCTION button until the frequency band appears on the display.

2.Press the BAND button to select the desired band.

3.Press the PLAY (PRESET) button or number button to select the preset number.

4.Use the TUNING button to find your desired station.

5.Press the MEMORY button twice on the remote.

6.Repeat steps 2-5 to store other stations

Tuning into a preset station

1.Press FUNCTION button until the frequency band appears on the display.

2.Press the BAND button to select the desired band.

Press the PLAY (PRESET) button to select the presetted station or use the numbered buttons to enter the number to select the presetted station.

Example: To select preset number 15, press the +10 and 5 buttons. To select preset number 10, press the +10 and 0 buttons.

26 (continued on next page)