CONNECTIONS
C. Audio Source Connection
You can use your unit as an audio source to connect to your stereo amplifier. Using the Audio/Video cable, connect ONLY the red and white plug from AV IN / OUT jack on your Unit to the AUDIO IN jack or use a Coaxial Digital Audio cable to conect to the coaxial in jack on your another equipment. Do not connect the yellow video plug.
Analogue connection
Rear of unit | (No need to connect |
|
the Yellow video plug) |
| |
| (Yellow) |
|
AUDIO/VIDEO CABLE (included) | (Red) |
|
|
| R |
| (White) | AUDIO |
|
| IN |
|
| L |
|
| Amplifier of |
To AV IN / OUT Jack | stereo system, etc. | |
Using External Audio Equipment
1.Turn on the unit.
2.Turn on your audio equipment and follow the instructions included with it to select the AUDIO IN or DIGITAL IN function.
Digital connection
Rear of unit
COAXIAL DIGITAL AUDIO CABLE | DIGITAL IN | |
(not included) | ||
| ||
| COAXIAL | |
| Audio equipment with | |
| digital audio input jack | |
To DIGITAL OUT Jack |
|
Notes:
When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connection.
You may experience interference if the tuner function is selected while the television is working. 
If you have a stereo VCR, make sure you set it in stereo mode.
Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, the resulting copy will be unclear, with poor sound quality. This is NOT caused by a defective DVD system.
Refer to the instruction manual of the connected equipment as well.
14 | (continued on next page) |
