9
Step 8
Drawer Track Assembly and Cylinder Retaining Bolt Installation
A.Attach one Drawer Track to Back Panel and Cabinet Upright using four 5/32 x .31” Bolts. Attach other Drawer Track to Back Panel and Right Side Panel using four 5/32 x .31” Bolts.
B.Install the Cylinder Retainer Bolt through the hole in the back of the Bottom Shelf into the nut welded underneath.
5/32 x .31” Bolt set
8 pc
A
B
Step 9
A. Drawer Assembly
Cylinder Retainer Bolt
Assemble Handle to Drawer Front with two 5/32 x .31” Bolts. Note: 1 extra screw provided.
Attach Drawer Front to Drawer Body with sIX 5/32 x .31” Bolts into threaded holes in inside of Drawer Front.
5/32 x .31” Bolt set
8 pc
A
drawer front
B
B. Drawer Positioning
Slide Drawer Assembly over the Drawer Tracks to position the Drawer.
