AUTOMATIC COOKING

Start cooking at the programmed time and switch the oven off automatically after the programmed cooking time.

Setting

1.Set the cooking function by turning the oven selector to the function required.

2.The cooking temperature appears on the display. To change it proceed as described in the Setting the cooking chapter.

3.Press pushbutton 2. AUTO starts to flash and 0.00 appears.

4.Press pushbuttons 5 or 6 to set the cooking time (cooking time in hours and minutes: set it to ten minutes less than the time required because the stored heat will complete the cooking).

5.On the display AUTO becomes steady and the cooking programme starts.

6.Press pushbutton 3 (AUTO starts to flash).

7.Press pushbuttons 5 or 6 to set the time when the cooking should finish.

The values set must be correct; e.g. if it is 08:00 a cooking time of 3 hours, ending at 10:00, cannot be set. In this case the programmer automatically sets the end of cook- ing time for 11:00.

8.On the display AUTO becomes steady and the time appears again. The cooking symbol goes out.

Starting cooking

9.The pan symbol lights up. The oven switches on and the cooking cycle set starts.

During cooking

10.During the cooking cycle, the display shows the oven temperature measured by the probe or pre-setted temperature.

Press key 2 to display the length of cooking set. Press key 3 to display when the cooking will finish.

The cooking time, end of cooking time and cooking temperature can be varied at any time, as described above.

At the end of cooking

11.End appears on the display, AUTO flashes and the audible signal sounds. The cooking cycle has finished and the oven is OFF.

13.Press any pushbutton to stop the audible signal.

14.OFF appears (oven OFF).

15.Turn the function selector to OFF (oven OFF).

16.The programmer display shows the time.

Note: At the end of the programme always turn the function selector knob to OFF (oven OFF).

IMPORTANT: During AUTOMATIC COOKING PROGRAM the oven light is always on, also before starting (heating elements on or cycling) of the programmed cooking.

I

I

I

 

I

I

 

I

I

 

I

I

 

 

I

I

 

I

I

 

 

I

I

I

I

I

I

I

 

I

I

 

II

2

5

6

I

I

I

I

I

I

I

 

I

I

 

II

3

5

6

I

I

I

I

I

I

I

I

I

 

II

21

Page 21
Image 21
Avanti DGE 2403 SC warranty Automatic Cooking, Starting cooking

DGE 2403 SC specifications

The Avanti DGE 2403 SC is a state-of-the-art appliance designed to enhance the cooking experience in modern kitchens. This innovative range boasts a combination of style, technology, and performance, making it an ideal choice for both home cooks and culinary enthusiasts.

One of the standout features of the Avanti DGE 2403 SC is its dual fuel capability. This range combines the precision of a gas cooktop with the consistency of an electric oven, providing users with the best of both worlds. The gas burners come equipped with high BTU outputs, allowing for vigorous boiling and rapid heating, while the electric oven ensures even baking and roasting results.

Equipped with multiple burners, the DGE 2403 SC includes a variety of sizes and configurations, accommodating different cooking needs. The powerful burners provide versatility, allowing for the simmering of delicate sauces or the searing of meats. The ergonomic design and easy-to-use controls ensure that transitioning between different cooking methods is seamless.

In terms of technology, the Avanti DGE 2403 SC features a digital display that simplifies monitoring temperatures and cooking times. The oven is outfitted with convection technology, which circulates hot air for faster cooking and promotes even heat distribution. This feature not only cuts down cooking time but also enhances the flavors and textures of foods.

Another notable characteristic of this range is its self-cleaning function, which saves users time and effort in maintaining a tidy kitchen. The self-cleaning mode utilizes high temperatures to burn off food residue, leaving the oven clean with minimal scrubbing required afterward.

The Avanti DGE 2403 SC also pays attention to design, showcasing sleek lines and a modern aesthetic that fits seamlessly into any contemporary kitchen. The stainless steel finish offers durability and easy cleaning, while the spacious oven capacity allows for cooking larger meals, perfect for entertaining or family gatherings.

Furthermore, safety features are integrated into the design, including flame failure devices on gas burners, ensuring that the gas flow is cut off if flames go out. This attention to safety offers peace of mind for busy households.

In summary, the Avanti DGE 2403 SC is a premium cooking range offering excellent features, advanced technology, and stylish design. The combination of dual fuel capabilities, convection cooking, self-cleaning functions, and safety measures make it an excellent choice for anyone looking to upgrade their kitchen appliances, setting a new standard in cooking performance and convenience.