•After the unit has been removed, the reflector bowl can be lifted out of the mounting.
•Clean the burners and reflector bowls with mild detergent and warm water. Wring excess water out of the sponge or cloth when cleaning them.
•Replace the burners and reflector bowls as follows:
•Line up the opening of the reflector bowls with the burners receptacle, hold the surface unit as level as possible with the terminal just positioned into the receptacle, then push the surface units’ terminal into the receptacle.
•When the terminal is pushed into the receptacles as far as it will go, push down the edge of the surface unit opposite the receptacle.
NOTE: Do not immerse burners in water or any other liquids.
¾LIFT-UP COOKTOP
You can access the area beneath of the cooktop for cleaning purposes by lifting up the cooktop. In order to do so:
•Unplug the power cord from the wall
•Hold the cooktop from the front left and right corners of cooktop and pull it up.
•After lifting up the cooktop high enough, set the support rod into place as shown.
•Leave the cooktop on the tip of support rod.
•Wipe with warm soapy water. Use a soapy steel- wool pad on heavily soiled areas.
•To lower the cooktop, lift the cooktop holding from the front edge. Replace the support rod to its previous position. Lower the cooktop in its place. During replacement of the cooktop, be sure that the front edge of the cooktop covers the upper edge of control panel.
NOTE: Do not drop the cooktop. Personal injury or damage to the cooktop frame could result.
Support Rod |
¾ REMOVABLE STORAGE DRAWER
For cleaning, you can remove the drawer by pulling it out until the stop point and lifting it up.
Never store any flammable material in the drawer.
¾REPLACING THE OVEN LIGHT
Before any maintenance is started involving electrical parts of the appliance, it must be disconnected from the power supply.
•Let the oven cavity and broil burner cool down.
•Switch off the electric supply.
•Remove the protective cover.
•Unscrew and replace the bulb with a new one suitable for using in high temperatures (300°C ~ 570°C / 572ºF – 1058ºF) having the same specifications: 250V 60Hz, 15W, E14.
•Replace the protective cover.
NOTE: Oven bulb replacement is not covered by your guarantee.
23
