
Getting Started
Basic Handset Operation Summary
If you want to | Then |
Remove the | Press down on the latch on the Battery Pack |
Battery Pack | at the back of the handset and pull the |
| Battery Pack towards you. The Battery Pack |
| releases outward. |
Replace the | Slide the lip of the Battery Pack into the |
Battery pack | bottom of the cavity. Push the top of the |
| Battery Pack until it snaps into place. You |
| should not have to force it into the handset. |
Turn handset on | Press and hold the END key until two chirps |
| sound. |
Turn handset off | Press and hold the END key. One chirp will |
| sound. If you are in a call, hang up first, then |
| turn off the handset. |
Unlock the keypad | Press the Unlk softkey, then #, to unlock the |
| keypad. |
Lock the keypad | Press the Cfg softkey then NavOK, to |
| manually lock the keypad. |
Make an internal call | Press the START key, wait for a dial tone, |
| then dial the extension. |
Make an external call | Press the START key, wait for a dial tone, |
| then dial the number just as you would from |
| your desk phone. |
16