3 Installing DNM | December 2001 |
Adding DEFINITY Proxy Agents | Page 40 |
Adding DEFINITY Proxy Agents
DNM collects configuration, fault, and performance data from DPA through SNMP. DNM requires you to enter the names of their DEFINITY Proxy Agents and administer the UDP port on which DNM will receive traps.
Procedure | Add DEFINITY Proxy Agents to be supported by DNM: |
Start > Programs >DEFINITY Network Management > Add New DEFINITY Proxy Agents
1In the IP Address field, enter the IP address (or network name) of the DEFINITY Proxy Agent from the PA001 form.
2In the Read Community field, enter the SNMP read community string of the DEFINITY Proxy Agent from the PA001 form. The default is public.
3In the Write Community field, enter the SNMP write community string of the DEFINITY Proxy Agent from the PA001 form. The default is g3pa.
4Click Send
The status line should indicate that DPA was successfully added to the system.
Repeat steps 1 though 4 for additional DEFINITY Proxy Agents on the PA001 form. When all agents have been added, close the window.
Note: PA001 form needs to be updated to include IP addresses for DEFINITY Proxy Agents and Community Strings.
It may take several hours before supported nodes and basic configuration alarm and error data can be collected.
