Basic Call Handling Features
Clearing a Call
To clear an established call either: 1. Replace the handset
or
2.Press 
Drop. You will hear dial tone, unless you are in ‘call center mode’ of working when you will then hear silence.
Headset Working
When a headset is to be used on your phone, it must be plugged in to the headset socket on the base of your phone. To activate the headset and switch off the handset, press 
Headset. The lamp beside the button is illuminated when headset working is activated.
To answer an incoming call:
1. Press the call appearance key 
next to the flashing bell icon (
):
To clear a headset call: 1. Press 
Drop.
To manually make a call:
1.Dial the number (remember to include the required access code (for example, 9) for an outside line) and listen to the progress of the call.
To automatically make a call:
Do any of the following:
•Press 
Redial and select from (up to) one of the last ten numbers that you dialed by pressing the associated a call appearance key. The call is made automatically for you
or
•Access the Call Log and initiate a call to a specific entry. See Making Calls from the Call Log.
or
•Access the Speed Dial List in your personal directory and initiate a call to a specific entry. See Dialing a Speed Dial Number.
•When the call is answered, speak to the called party.
5410/2410 Phone User Guide | Page 9 |
IP Office | Issue 3f (7th October 2005) |
