Avaya 6408 Call a, Call b, Call c, Program, AD entry, 7PD\7LPHU &SDUN3DXVH, Your voice terminal

Your voice terminal 4

3ÅŠš•Ì·kÌbŠÅ-‘@àÌXžšÎž‘ÌN×ÎΞšÅÌ@šbÌÅžxΕkàÅ

7P'D\7LPHU &SDUN3DXVH

Sample feature option screen

•The four display control buttons are (from left to right):

-Menu for entering Softkey Mode and accessing the first feature option screen

-Exit for exiting the Softkey Mode and returning to Normal Mode

-Previous and Next for going back and forth through the feature option screens.

•The softkeys located below the display are used along with display control buttons to access features. If a feature is active, an arrow appears above the feature abbreviation.

The display gives you call-related information for incoming calls. When the call is from a sys- tem user, the display shows the caller’s name and extension number. When the call is from outside the system, the display shows the calling party’s number.

3ÅŠš•Ì·kÌX@‘‘Ì@--k@Â@šXkËxk@Î×ÂkÌN×ÎΞšÅ
				In most cases 3 of these buttons are devoted to incoming and outgoing calls (call appear-
			Call a	ances). The remaining buttons can also be call appearance buttons or they can access addi-
				tional features (feature buttons). The features are administered on the call appearance/feature
			Call b
				buttons by your system manager.
			Call c	Each of these buttons has a red light and a green status light.
			Program		GreenQH[W￿WRstatus￿D￿EXWWRQlight￿	Off	Steadily on	Flashing	Slow Flash	Intermittent
										Flash
					feature button	Off	Active	—	—	Invalid
			AD entry
					extension button	Idle	Busy	—	—	—
					call appearance	Idle	Busy	Incoming call	Held call	—
		Sample labelled card		The red light tells you this is the line you are using or this is the line you will get when you go
	To install the designation card on your termi-			off–hook.
	nal, unsnap the plastic cover and lift off.