128 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
Configure the G700 Media
Gateway (See Using the Avaya
Installation Wizard (IW) on
page 161
-Assign IP addresses to the G700 processors
-Set up default IP route for the G700
-Check IP connections
-Set up controller list for the G700
- Configure X330 Expansion Module, if
necessary
Install new firmware on the
G700 and media modules (See
Using the Avaya Installation
Wizard (IW) on page 161
-Verify contents of the tftp directory
-Determine which firmware to install
-Install firmware on the P330 Stack Processor
-Install firmware on the G700 media gateway
processor
-Install firmware on the media modules
-Install firmware on other G700s in the stack
or network, if any
-Set Rapid Spanning Tree
Installing IA770 service pack
files, if any on page 170 - Log in to the S8300 platform
- Install IA770 service pack, if any
- Stop the system
- Restart the system
- Enable messaging on the S8300 Web
interface, if necessary
Administer Communication
Manager on page 173 - Reboot the system
- Assign node names, if necessary
- Administer network regions
- Assign LSPs to network regions
- Administer IP interfaces
- Administer the LSP form
- Add media gateway
- Verify changes
- Enable announcements, if necessary
- Save translations
Considerations for IP Phones
Supported by a Local Survivable
Processor on page 193
Complete the Installation of the
S8300 (if the Primary
Controller) on page 195
- Register the system
- Back up the system
- Check planning documentation
- Connect and administer test endpoints
- Complete electrical installation
- Enable adjunct systems
Checklist 1: Install New G700 with an S8300 (Primary or LSP) with the Avaya
Installation Wizard (continued)
Major Tasks Subtasks
2 of 3