Manual installation of a new G700 with an S8300
480 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
Saving Translations
Note:
Note: Skip this procedure if the S8300 is an LSP.
To save translations
1. In a telnet session, open a SAT session, and log in again as craft (or dadmin).
2. At the SAT prompt, type save translation and press Enter.
When the save is finished, the system displays the message:
Command successfully completed
Installing Communication Manager service pack files, if any
Note:
Note: Skip this procedure if there are no Communication Manager update files to
install.

To install Communication Manager update files

1. From your laptop, open an SSH session to the S8300.
If IA770 will be used with this system, the IA770 software is automatically installed after the
Communication Manager software is installed. If the IA770 installation has not completed,
the following warning screen will appear.
!CAUTION:
CAUTION: If this warning screen appears, close the SSH session, wait about 5 minutes, and
try again.
2. At the SSH prompt, type cd /var/home/ftp/pub and press Enter to access the FTP
directory.