Before Going to the Customer Site
Issue 9.1 June 2006 461
Connecting using the customer’s LAN
If you can connect to the customer’s LAN, you can:
1. Install the S8300 software by:
- Opening the Web interface on the S8300 and using the Avaya Installation Wizard
or,
- Opening the Web interface on the S8300 and using the main menu
2. Upgrade the G700 firmware by:
- Opening the Web interface on the primary server and using the Avaya Installation Wizard
or Upgrade Tool
or,
- Opening a telnet session to the P330 stack processor and perform the installation
commands
Note:
Note: For LAN connections, the TFTP server can be your laptop or a customer
computer on the LAN.
See About connection and login methods on page 56 for details on how physically to connect
and log into the G700.
Before Going to the Customer Site
The procedures in this section should be completed before going to the customer site or before
starting a remote installation.
Perform the following pre-installation tasks:
●Installing TFTP server (or obtaining USB CD-ROM drive)
●Collecting Upgrade Information
●Obtaining service pack files, if needed
●If using IA770, obtaining service pack and language files
●Completing the RFA process (Obtaining license and password file)