Avaya H323 manual HP Procurve CLI output, Port Vlan Description Voice Data

HP Procurve CLI output

; J8164A Configuration Editor; Created on release #H.08.60

hostname "AvayaLabs"

snmp-server community "public" Unrestricted vlan 1

name "Native" untagged 1-2,4,7-26

ip address 192.168.202.201 255.255.255.0 no untagged 3,5-6

exit vlan 209

name "Red [Voice]" untagged 5 tagged 3

exit vlan 210

name "Blue [Data]" untagged 3,6 exit

gvrp spanning-tree

The table below summaries the HP configuration for ports and VLAN’s.

Port	VLAN 209	VLAN 210	Description
	Voice	Data
3	Tagged	Untagged	This port was added to both VLAN 209 and VLAN 210. However there is an
			important difference between adding to these VLAN’s. When adding port 3 to
			VLAN 209 the Mode option must be tagged but untagged when adding to VLAN
			210.
5	Untagged	–	This port is included only in VLAN 209 and not included in VLAN 210. The Mode
			option must be set to Untagged for port 5 in this VLAN.
6	–	Untagged	Port 6 is included only in VLAN 210 and not included in VLAN 209. The Mode
			option MUST be set to Untagged in this VLAN.

The operation of this network is dependant on the functionality defined in HP documentation. Specifically HP refers to this type of VLAN operation as Overlapping VLAN. The configuration relies also on that fact that Avaya 4600 IP Phones support VLAN operation .

H323 Phone Install	Page 50
IP Office 4.2	15-601046 Issue 15b (16 July 2009)