4.5 Resetting a Phone

Resetting a Phone

Resetting a phone clears the phones user settings but retains system settings such as the DHCP and file server addresses.

1.While the phone is on-hook and idle, press the following sequence: MUTE 7 3 7 3 8 # (MUTE R E S E T #). Reset values? is displayed.

2.To cancel this procedure press *. To continue press #.

WARNING

As soon as you press #, all static information will be erased without any possibility of recovering the data.

3.Whilst the system values are reset to their defaults, Resetting values is displayed.

4.Once the system values are reset, Restart phone? is displayed.

To end the procedure without restarting the phone, press *.

To restart the phone, press #. The remainder of the procedure then depends on the status of the boot and application files. See Restart Scenarios 62 .

Clearing a Phone

Clearing a phone removes all data values including settings such as the DHCP and file server addresses. This returns the phone to almost its original out-of-box state. The phone will still retain the firmware files it has downloaded.

1.While the phone is on-hook and idle, press the following sequence: MUTE 2 5 3 2 7 # (MUTE C L E A R #). Clear all values? is displayed.

2.To cancel this procedure press *. To continue press #.

WARNING

As soon as you press #, all static information will be erased without any possibility of recovering the data.

3.Whilst the system values are reset to their defaults, Clearing values is displayed.

4.Once all values are cleared, the phone will restart as if a new phone.

H323 Phone Install

Page 58

IP Office 4.2

15-601046 Issue 15b (16 July 2009)

Page 58
Image 58
Avaya H323 manual Resetting a Phone, Clearing a Phone