Getting Started — Communication Components

combination is available—you can cycle the video output by pressing the Fn + F5 keys.

If the external CRT is connected, the display on the LCD and the CRT is the same.

Tip: To ensure trouble-free video output, the first time you use an external monitor, change the output in the Display Properties dialog box. After successfully switching modes, you may use the video function keys.

Note: Light or dark dots may appear on the LCD due to technical limitations of LCD manufacturing. This will not effect normal operation of the LCD.

Communication Components

This system provides powerful communication functions, including a built-in wireless LAN, Data and Fax Modem, and wired Ethernet LAN.

Data and Fax Modem and Wireless and Wired LAN

A phone jack on the left side of the computer allows you to connect to the Internet to send and receive data. When used with fax software, it can be used as a fax. When using this function, first plug the phone cord into the jack. The Wireless and Wired LAN function allows you to connect to the Internet or any network with and without wires.

Anti-electromagnetic wave clip (not included)

To eliminate electromagnetic waves, it is strongly recommended that you thread the phone line or LAN cable through the clip provided as shown below when connecting to a phone line or LAN cable.

Attention:

When using the data communications function, please do not connect your notebook computer’s modem to an ISDN or PBX jack to avoid damage to the modem.