Using the BIOS Setup Utility

 

 

 

 

1st Boot Device

CD/DVD

1st Boot Device default is USB FDD.

 

2nd Boot Device

 

2nd Boot Device default is CDROM.

 

USB FDD

3rd Boot Device default is IDE-0.

 

3rd Boot Device

 

 

HDD

 

 

 

 

 

 

S.M.A.R.T. for Hard

Disabled

Only S.M.A.R.T. Hard Disks are

 

Disks

Enabled

supported. The default is Disabled.

 

 

 

 

 

Display Expansion

Disabled

If you are using DOS or a 640 x 480

 

Support

 

resolution to run windows, the display

 

 

 

will not fill the entire screen. Enable

 

 

Enabled

 

this mode to expand the display to the

 

 

 

 

 

 

entire screen. The default is Enabled.

 

 

 

 

 

Password Check

Setup

The default value is Setup, which

 

 

 

specifies that a password is only

 

 

 

required to enter the setup utility.

 

 

 

 

 

 

Always

If Always is selected, the password is

 

 

 

required when the system is booted up

 

 

 

or resuming from a suspend-to-disk.

 

 

 

 

 

Share Memory Size

8MB

This field displays the amount of

 

 

 

memory detected by the system during

 

 

16MB

 

bootup. It allows you to select shared

 

 

 

memory size for VGA usage. They are

 

 

32MB

 

display only fields.

 

 

 

 

 

 

 

 

 

64MB