Using the BIOS Setup Utility —Navigating and Entering Information in BIOS

Navigating and Entering Information in BIOS

Use the following keys to move between fields and to enter information:

Key

Function

 

 

Del

Press Del to start the BIOS utility after

turning on the computer.

 

 

 

 

Press Esc to exit any section. If you wish to

ESC

exit the BIOS utility without saving changes,

 

go to the main menu, then press Esc.

 

 

Up, down keys (ÇÈ)

Push the up and down arrow keys to move

among selections, then press Enter to make

 

a selection.

 

 

 

Use the PgUp, PgDn keys to modify a field.

 

Use PgUp to increase a value, such as a date

PgUp or PgDn

or number, and PgDn to decrease it. For

other types of choices, such as “enabled,” or

 

 

“disabled,” use either key to move between

 

choices.

 

 

Enter

Press enter to make a selection

 

 

F2 or F3

Pressing either key changes the color of the

graphic display.

 

 

 

F10

Press F10 to save changes, then exit.

 

 

The Main Menu

The Setup Utility menu bar has nine main screens: Standard CMOS Setup, Advanced CMOS Setup, Power Management Setup, Auto-Detect Hard

Disks, Change User Password, Change Supervisor Password, Auto Configuration with Optimal Settings. Save Settings and Exit, and Exit

Without Saving are used to exit the Setup Utility.

AMIBIOS HIFLEX SETUP UTILITY – VERSION 1.38

(C)2001 American Megatrends, Inc. All Rights Reserved

Standard CMOS Setup

Advanced CMOS Setup