92AutoView 3008/3016 Switch Installer/User Guide

Table C.1: UTP Wiring Standards (Continued)

Pin

EIA/TIA 568A

EIA/TIA 568B

 

 

 

8

brown

brown

 

 

 

Cabling installation, maintenance and safety tips

The following is a list of important safety considerations that should be reviewed prior to installing or maintaining your cables:

Keep all UTP runs to a maximum of 100 feet each.

Maintain the twists of the pairs all the way to the point of termination, or no more that one-half inch untwisted. Do not skin off more than one inch of jacket while terminating.

If bending the cable is necessary, make it gradual with no bend sharper than a one inch radius. Allowing the cable to be sharply bent or kinked can permanently damage the cable’s interior.

Dress the cables neatly with cable ties, using low to moderate pressure. Do not over tighten the ties.

Cross-connect cables where necessary, using rated punch blocks, patch panels and components. Do not splice or bridge the cable at any point.

Keep the UTP cable as far away as possible from potential sources of EMI, such as electrical cables, transformers and light fixtures. Do not tie the cables to electrical conduits or lay the cables on electrical fixtures.

Always test every installed segment with a cable tester. “Toning” alone is not an acceptable test.

Always install jacks so as to prevent dust and other contaminants from settling on the contacts. The contacts of the jack should face up on the flush mounted plates, or left/right/down on surface mount boxes.

Always leave extra slack on the cables, neatly coiled in the ceiling or nearest concealed location. Leave at least five feet at the work outlet side and 15 feet at the patch panel side.

Choose either 568A or 568B wiring standard before beginning. Wire all jacks and patch panels for the same wiring scheme. Don’t mix 568A and 568B wiring in the same installation.

Always obey all local and national fire and building codes. Be sure to firestop all the cables that penetrate a firewall. Use plenum rated cable where it is required.

Page 104
Image 104
Avocent 3008/3016 manual Cabling installation, maintenance and safety tips

3016, 3008/3016, 3008 specifications

The Avocent 3008, 3016, and 3016 KVM (Keyboard, Video, Mouse) switches are advanced solutions in the field of IT management, designed for data center environments that require seamless control over multiple servers and devices. These switches are known for their reliability, performance, and user-friendly features, making them essential tools for system administrators and IT professionals.

One of the primary features of the Avocent 3008 and 3016 series is their capability to manage multiple servers simultaneously. The model numbers denote the number of devices that can be controlled, with the 3008 supporting up to eight servers and the 3016 accommodating up to sixteen. This allows IT professionals to maximize their control and minimize the physical hardware required in server rooms.

Both the 3008 and 3016 support high-definition video output, ensuring that users receive clear and crisp visual displays from their servers. The ability to handle resolutions up to 1920x1200 at high refresh rates facilitates smooth and efficient operation, especially for graphics-intensive applications. The integrated video compression technology further enhances this capability by ensuring optimal video performance across different server configurations.

Security is another critical aspect of the Avocent switches. They come equipped with advanced user authentication and access management features, which prevents unauthorized access to the connected devices. The switches comply with various security standards, ensuring that sensitive data is protected throughout the management process.

The Avocent 3008 and 3016 also boast an intuitive on-screen display (OSD) that simplifies the user interface. This feature enables users to easily navigate between connected servers, manage settings, and access administrative functions with minimal effort. In addition, they support a variety of connection interfaces, including USB and PS/2, to accommodate different types of keyboards and mice.

In terms of connectivity, the Avocent switches support both local and remote access, allowing system administrators to manage servers from anywhere within the network. This flexibility is essential for modern IT operations, where remote management has become a standard practice.

Overall, the Avocent 3008 and 3016 series KVM switches offer robust features, advanced technology, and user-friendly designs. Their ability to manage multiple servers efficiently, combined with high-definition video support, enhanced security measures, and flexible connectivity options, makes them ideal for any data center looking to optimize its IT management processes. Whether for small businesses or large enterprises, these KVM switches help streamline operations and improve overall productivity.