Avocent DSR1030, DSR4030, DSR8030 Click, Modify, Press Alt+N or click Name in the Main dialog box, 4.Repeat steps 1-3for each target device in the system, To assign names to target devices:

20DSR Switch Installer/User Guide

To assign names to target devices:

1.In the Names dialog box, select a target device name or port number and click Modify. The Name Modify dialog box appears.

Figure 3.4: Name Modify Dialog Box

2.Type a name in the New Name box. Names of target devices may be up to 15 characters long. Legal characters include: A-Z, a-z, 0-9, space and hyphen.

3.Click OK to transfer the new name to the Names dialog box. Your selection is not saved until you click OK in the Names dialog box.

4.Repeat steps 1-3 for each target device in the system.5.Click OK in the Names dialog box to save your changes. -or-Click X or press Escape to exit the dialog box without saving changes.

NOTE: If a DSRIQ module has not been assigned a name, the EID is used as the default name.

To list target devices alphabetically by name:Press Alt+N or click Name in the Main dialog box.