Avocent DSR1030, DSR4030, DSR8030 Click, Resetting your PS/2 keyboard and mouse, If the OSCAR interface is not open, press, To reset the PS/2 mouse and keyboard values:

Chapter 3: Local Port Operation 37

Figure 3.18: Disconnect Dialog Box

4.Click OK to disconnect the user and return to the User Status dialog box. -or-

Click X or press Escape to exit the dialog box without disconnecting a user.

NOTE: If the User Status list has changed since it was last displayed, the mouse cursor will turn into an hourglass as the list is automatically updated. No mouse or keyboard input will be accepted until the list update is complete.

Resetting your PS/2 keyboard and mouse

NOTE: This function is for Microsoft Windows-based computers only. Resetting the PS/2 on a target device running any other operating system may require that you reboot that target device.

If your PS/2 keyboard or mouse locks up, you may be able to re-establish operation of these peripherals by issuing a Reset command. The Reset command sends a hot-plug sequence to the target device which causes the mouse and keyboard settings to be sent to the DSR switch. With communication reestablished between the target device and the DSR switch, functionality is restored to the user.

To reset the PS/2 mouse and keyboard values:

1.If the OSCAR interface is not open, press Print Screen. The Main dialog box will appear.