Avocent DSR1030, DSR4030, DSR8030 Energy, Screen, For Mode, select, Setup - Screen Saver, Setting local port Screen Saver options, If the OSCAR interface is not open, press

30DSR Switch Installer/User Guide

Setting local port Screen Saver options

Use the Screen Saver dialog box to manage the screen saver inactivity time and test the Screen Saver mode on the local port. If security has been enabled in the DSView software, after the specified Inactivity Time elapses, the local port locks and remains locked until you press any key or move the mouse. You will then need to log in to continue.

To access the OSCAR interface Screen Saver dialog box:

1.If the OSCAR interface is not open, press Print Screen. The Main dialog box will appear.

2.Click Setup - Screen Saver. The Screen Saver dialog box appears.

Figure 3.13: Screen Saver Dialog Box

To set the Screen Saver options:

NOTE: The Screen Saver password is set within the DSView software. For more information, see the DSView Installer/User Guide.

1.Type the number of minutes for Inactivity Time (from 1-99) to delay activation of password protection and the screen saver feature.

2.For Mode, select Energy if your monitor is ENERGY STAR® compliant; otherwise select Screen.

CAUTION: Monitor damage can result from the use of Energy mode with monitors not compliant with

ENERGY STAR®.