38DSR Installer/User Guide

4.Type the number of minutes for Inactivity Time (from 1–99) to delay activation of the screen saver.

5.Choose Energy if your monitor is ENERGY STAR compliant; otherwise select Screen.

CAUTION: Monitor damage can result from the use of Energy Mode with monitors not compliant

with ENERGY STAR®.

6.(Optional) Click Test to activate the screen saver test which lasts 10 seconds then returns you to the Security dialog box.

7.Click OK.

NOTE: Activation of the screen saver mode disconnects the user from a server; no server is selected. The status fl ag displays Free.

To exit the screen saver mode:

Press any key or move your mouse. Any previous server connection will be restored.

To turn off the screen saver:

1.From the Main dialog box, click Setup - Security. The Security dialog box will appear.

2.In the Security dialog box, clear Enable Screen Saver.

3.Click OK.

To immediately turn on the screen saver:

Press Print Screen, then press Pause. This command only works when the

user is connected to a server.

Setting the Keyboard Country Code

NOTE: Using a keyboard code that supports a language different from that of your DSR switch fi rmware will cause incorrect keyboard mapping.

Sun servers may use key mappings for non-US keyboards. By default, the DSR1021 switch sends the US keyboard country code to Sun and USB modules attached to servers, and the code is applied to the servers when they are powered up or rebooted. Codes are then stored in the DSRIQ module.

Issues may arise when you use the US keyboard country code with a keyboard of another country. For example, the Z key on a US keyboard is in the same location as the Y key on a German keyboard. Sun servers will interpret pressing the Y key on a German keyboard as pressing the Z key when the US keyboard country code is used.