62DSR Installer/User Guide

•Ensure that an external modem is attached to the DSR1021 switch MODEM port. The modem should have auto-answer turned off (typically a modem’s default setting).

•Ensure that your Client PC contains dial-up software and that the software is configured properly. See your operating system documentation for more information.

To establish a remote DSView Client software session over a modem connection:

1.Establish a dial-up connection to the DSR1021 switch from the DSView Client software PC. The IP address 10.0.0.2 will be assigned to the DSR1021 switch and the IP address 10.0.0.3 will be assigned to the DSView Client software PC.

NOTE: Windows displays a dialog box that prompts the DSR switch user for a username and password when a dial-up connection is established. It is not necessary to enter a username or password in the dialog box. When this dialog box appears, click OK to dismiss the dialog box.

2.When a connection is established, start the DSView software on the DSView Client software PC.

3.Select Options - Remote Operations - Enable. The Remote Login Authentication dialog box displays.

Figure B.1: Remote Login Authentication Dialog Box

NOTE: The DSR1021 switch will disconnect the modem connection if a DSR switch user does not log in within the time period specifi ed by the Authentication Timeout value. The default authentication time-out value (120 seconds) may be changed using the Terminal Applications menu. See Chapter 4 for more information.