Avocent DSRTM 1021 To set the keyboard country code for Sun servers:, NOTE:, NOTE:, Figure 3.12: Keyboard Dialog Box

Chapter 3: Local Port Operation 39

The Keyboard command enables you to send a different keyboard country code than the default US setting. The specified country code is sent to all servers attached to the DSR1021 switches when they are powered up or rebooted, and the new code is stored in the DSRIQ module.

NOTE: If a DSRIQ module is moved to a different server, the keyboard country code will need to be reset.

See Appendix F for information on emulating certain Sun keys using a PS/2 keyboard and special considerations for Japanese and Korean Sun

USB keyboards.

NOTE: Only local users can view or change keyboard country code settings.

To set the keyboard country code for Sun servers:

1.If the OSCAR interface is not open, press Print Screen. The Main dialog box will appear.

2.Click Setup - Keyboard. The Keyboard dialog box appears.

Figure 3.12: Keyboard Dialog Box

3.Select a country code and click OK.

4.Reboot the Sun servers. After rebooting, each Sun server will request the country code setting stored in the DSRIQ module.

NOTE: If you wish to reboot the servers by power-cycling them, you must wait 90 seconds before rebooting. A soft reboot may be performed without waiting 90 seconds.