42DSR Installer/User Guide

Figure 3.15: Disconnect Dialog Box

4.Click OK to disconnect the user and return to the User Status dialog box. -or-

Click X or press Escape to exit the dialog box without disconnecting a user.

NOTE: If the User Status list has changed since it was last displayed, the mouse cursor will turn into an hourglass as the list is automatically updated. No mouse or keyboard input will be accepted until the list update is complete.

Resetting Your PS/2 Keyboard and Mouse

If your PS/2 keyboard or mouse locks up, you may be able to re-establish operation of these peripherals by issuing a reset command. The reset command sends a hot-plug sequence to the server which causes the mouse and keyboard settings to be sent to the DSR1021 switch. With communication re-established between the server and the DSR1021 switch, functionality is restored to the user.

NOTE: This function is for Microsoft Windows-based computers only. Resetting the PS/2 on a server running any other operating system may require that you reboot that server.

To reset the PS/2 mouse and keyboard values:

1.If the OSCAR interface is not open, press Print Screen. The Main dialog box will appear.

2.Click Commands - Reset PS/2. A message box displays requesting that you confirm the reset. Click OK.

a.A message appears indicating that the mouse and keyboard have been reset.