Chapter 3: Local Port Operation

37

 

 

To password protect your console:

1.Set your password as described in the previous procedure.

2.Select Enable Screen Saver.

3.Type the number of minutes for Inactivity Time (from 1-99) to delay activation of password protection and the screen saver feature.

4.For Mode, select Energy if your monitor is ENERGY STAR® compliant; otherwise select Screen.

CAUTION: Monitor damage can result from the use of Energy mode with monitors not compliant

with ENERGY STAR®.

5.(Optional) Click Test to activate the screen saver test which lasts 10 seconds then returns you to the Security dialog box.

6.Click OK.

To log in to your console:

1.Press any key or move the mouse.

2.The Password dialog box appears. Type your password, and then click OK.

3.The Main dialog box appears if the password was entered correctly.

To remove password protection from your console:

1.From the Main dialog box, click Setup - Security; the Password dialog box appears. Type your password, and then click OK.

2.In the Security dialog box, single-click and press Enter or double-click in the New box. Leave the box blank. Press Enter.

3.Single-click and press Enter or double-click in the Repeat box. Leave the box blank. Press Enter.

4.Click OK to eliminate your password.

To enable the screen saver mode with no password protection:

1.If your console does not require a password to gain access to the Security box, go to step 2.

-or-

If your console is password protected, see the previous procedure, then go to step 2.

2.From the Main dialog box, click Setup - Security. The Security dialog box will appear.

3.Select Enable Screen Saver.