Chapter 3: Local Port Operation

35

 

 

Figure 3.10: Commands Dialog Box

3.Select Scan Enable in the Commands dialog box.

4.Click X to close the Commands dialog box.

NOTE: Scanning will begin as soon as the scan button is checked.

To cancel scan mode:

1.Select a server if the OSCAR interface is open. -or-

Move the mouse or press any key on the keyboard if the OSCAR interface is not open. Scanning will stop at the currently selected server.

-or-

If the OSCAR interface is not open, press Print Screen. The Main dialog box will appear.

2.Click Commands. The Commands dialog box appears.

3.Clear Scan Enable.

Setting Console Security

Use the Security dialog box to set security on your local port console. You can establish a screen saver mode that engages after your console remains unused for a specified Inactivity Time. Once engaged, your console will remain locked until you press any key or move the mouse. You will then need to type in your password to continue.