26LongView IP KVM Extender Installer/User Guide
2.Choose option 1 to access the Receiver Menu and enter the password if necessary. The Receiver Main Menu will appear.
3.Press 8 to select Console Settings and press Enter. The Console Settings Menu will appear.
4.Enter the number corresponding with Session Retry and press Enter. The Session Retry Menu will appear.
Figure 3.14: Session Retry Menu
To change the retry settings:
1.Access the Session Retry Menu via the serial menu as described in the previous procedure.
2.To change the time interval between retry attempts, press 1 to select the Session Retry Timeout Seconds otpion and press Enter. You will be prompted to enter a new timeout value in SS (seconds) format.
3.Type a value between 1 and 60 (inclusive) and press Enter.
4.To confirm your selection and exit the screen, type 0 (zero) and press Enter.
Audio Performance Settings
You can use this option to modify the audio performance settings or to disable audio support. There are three settings available: high, medium and off. The high setting provides the best audio performance and should be used when high network bandwidth is available.
NOTE: To ensure that audio operates correctly, configure the receiver and the transmitter with identical audio performance settings.
To change the audio performance setting for the receiver and transmitter:
1.Activate the serial menu as described in Accessing the serial menu on page 12.
2.Choose option 1 to access the Receiver Menu or option 2 to access the Transmitter Menu. If the password option is enabled, you will be prompted for a password.
3.Type the password and press Enter. The Transmitter Main Menu will appear.
