Axis Communications 209FD/FD-R manual Lens adjustments, Position, Focus

AXIS 209FD/AXIS 209FD-R Installation Guide

Lens adjustments

Position

To adjust the position of the lens, follow these steps:

1.	Open the Live View page in your	Locking screw
	web browser.
2.	Using the supplied allen key, loosen
	the 2 locking screws, as shown here. Insert Allen
3.	Insert the allen key into the small	key here

hole in the lens casing.

4.While checking the image in the Live View page, move the lens to the desired position.

5. When the camera shows the required view, gently retighten the locking screws (torque < 0.4 Nm).

Locking screw

Focus

The focus of the AXIS 209FD/FD-R is set at the factory from 0.5m to infinity. It does not normally need adjustment.

To focus on objects closer than 0.5m, or if for some reason the lens has lost focus, this can be adjusted by loosening the focus lock screw with a 1.5mm allen key (not supplied). Use the image in the Live View page to adjust the focus.

Page 11

ENGLISH

Focus lock screw