Panasonic DMCGF6KK owner manual 135, Adjust the flash output, Setting the wireless flash

Recording

Adjust the flash output

Applicable modes:

Adjust the flash brightness when pictures taken with the flash are over or underexposed.

1Select [Flash] in the [Rec] menu. (P38)

2Touch [Flash Adjust.].

3Set the flash output by dragging the slide bar, and then touch [Set].

•You can adjust from [j2 EV] to [i2 EV] in steps of [1/3 EV].

•Select [n0] to return to the original flash output.

•[i] or [j] is displayed on the flash icon in the screen when the flash level is adjusted.

•It can be set only when [Wireless] in [Flash] is set to [OFF]. (P135)

Setting the wireless flash

Applicable modes:

You can separately control flash-firings of the built-in flash and each flash in three groups by using the flash that supports the wireless control (DMW-FL360L: optional).

Preparations: Open the flash of this unit by pressing flash open button.

1Configure the external flash setting to RC mode, and then place the external flash.

•Set the channel and group of the external flash.

2Select [Flash] on the [Rec] menu. (P38)

3Select [Wireless] and then touch [ON].

•When [Wireless] is set to [ON], [WL] is displayed on the flash icon on the recording screen.

•When making detailed settings of the wireless flash, set the following from [Flash].

[Wireless Channel]

Select the channel that corresponds to the channel of the external flash you want to control.

Settings: [1CH]/[2CH]/[3CH]/[4CH]

[Wireless FP]

During wireless recording, an external flash fires an FP flash (high speed repetition of flash firing). This firing allows recording with the flash at a fast shutter speed.

Settings: [ON]/[OFF]

[Communication Light]

Set the communication light level for wireless recording.

Settings: [HIGH]/[STANDARD]/[LOW]

135