Panasonic DMCGF6KK owner manual 136, Wireless Setup, Firing Mode, Manual Flash Adjust

Recording

A B

[Wireless Setup]

• Press the [DISP.] button to fire a test-flash.

AFiring Mode B Flash output C Luminosity ratio

		C
Item		Description of settings
	[Firing Mode]
	[TTL]:	The camera automatically sets the output of the built-in
[Built-in		flash.
Flash]¢	[OFF]:	The built-in flash fires only a signal-flash.
	[Flash Adjust.]
	The output of the built-in flash is set manually.
	[Firing Mode]
	[TTL]:	The camera automatically sets the output of the external
		flash.
	[AUTO]¢:	Flash output is set by the external flash.
[A Group]/	[MANUAL]:	Set the luminosity ratio of the external flash manually.
	[OFF]:	The external flashes in the specified group will not fire.
[B Group]/
	[Flash Adjust.]
[C Group]
	Set the output of the external flash manually when [Firing Mode] is set to
	[TTL].

[Manual Flash Adjust.]

Set the luminosity ratio of the external flash when [Firing Mode] is set to [MANUAL].

•You can set from [1/1] (full brightness) to [1/128] in steps of [1/3].

¢Not available when [Wireless FP] is set to [ON].

136