Panasonic DMCGF6KK 296, Insert SD card again/Try another card, Folder cannot be created

Others

[Memory Card Error]/[Memory card parameter error]/[This memory card cannot be used]

>Use a card compatible with this unit. (P32)

•SD Memory Card (8 MB to 2 GB)

•SDHC Memory Card (4 GB to 32 GB)

•SDXC Memory Card (48 GB, 64 GB)

[Insert SD card again]/[Try another card]

•An error has occurred accessing the card.

>Insert the card again.

>Insert a different card.

[Read Error/Write Error Please check the card]

•It has failed to read or write data.

>Remove the card after turning this unit off. Insert the card again, turn this unit on, and try to read or write the data again.

•The card may be broken.

>Insert a different card.

[Cannot record due to incompatible format(NTSC/PAL) data on this card.]

>Perform formatting (P55) on this unit after saving necessary data on a PC, etc.

>Insert a different card.

[Motion recording was cancelled due to the limitation of the writing speed of the card]

•Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures.

•In the event that it stops even after using a “Class 4” card or higher, the data writing speed has deteriorated so it is recommended to make a backup and then format (P55).

•Depending on the type of the card, motion picture recording may stop in the middle.

[A folder cannot be created]

•A folder cannot be created because there are no remaining folder numbers that can be used.

>Format the card on this unit after saving necessary data on a PC etc. (P55) If you execute [No.Reset] in the [Setup] menu after formatting, the folder number is reset to 100. (P54)

296