Panasonic DMCGF6KK owner manual 322, Card is not recognized by the PC

Others

The card is not recognized by the PC.

>Disconnect the USB connection cable. Connect it again while the card is inserted in the camera.

>If there are two or more USB terminal on a single PC, try connecting the USB connection cable to another USB terminal.

The card is not recognized by the PC. (SDXC memory card is used.)

>Check if your PC is compatible with SDXC memory cards. http://panasonic.net/avc/sdcard/information/SDXC.html

>A message prompting to format the card may be displayed when connecting, but do not format.

>If the [Access] displayed on the monitor does not disappear, disconnect the USB connection cable after turning this unit off.

The picture cannot be printed when the camera is connected to a printer.

•Pictures cannot be printed using a printer that does not support PictBridge.

>Set to [PictBridge(PTP)] in [USB Mode]. (P51, 284)

The ends of the pictures are cut at printing.

>When using a printer with a Cropping or borderless printing function, cancel this function before printing. (For details, refer to the operating instructions for the printer.)

>When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can be printed.

The panorama picture is not printing correctly.

•Since aspect ratio of a panorama picture differs from normal pictures, it may not always be possible to print it correctly.

>Please use a printer that supports panorama pictures. (For details, please see the operating instructions of your printer.)

>We recommend using the “PHOTOfunSTUDIO” software on the CD-ROM (supplied) to adjust the size of the still picture to the print paper size.

322