(Touch AE)

Recording

Easily Optimizing the Brightness for a Specified Area

Applicable modes:

You can optimize the focus and brightness for a touched position by optimizing the brightness when using the Touch AF. When the face of the subject appears dark, you can brighten the screen according to the brightness of the face.

1

2

3

4

Select [Touch Settings] in the [Custom] menu. (P38) Select [Touch AF] and then touch [AF+AE].

Touch the subject you want to optimize the brightness for.

AF area setting screen is displayed. (P153)

 

The brightness optimization position is displayed on the

 

center of the AF area. The position follows the movement

 

of the AF area.

ュリヴヱハ 5HVHW

6HW

[Metering Mode] is set to [

AE ], which is used exclusively

 

for the Touch AE.

Touching [Reset] returns the brightness optimization position and the AF area to the center.

Touch [Set].

The AF area with the same function as [Ø] is displayed on the touched position.

Touching [ ] returns [Metering Mode] to the original setting and cancels the brightness optimization position. The AF area setting is also canceled.

Touching [ ] returns [Metering Mode] to the original setting and cancels the brightness optimization position.

When the background has become too bright, etc., the brightness contrast with the background can be adjusted by compensating the exposure.

When recording with the Touch Shutter, the focus and brightness are optimized for the touched position before recording takes place.

At the edge of the screen, the metering may be affected by the brightness around the touched location.

Not available in these cases:

In the following cases, the Touch AE function does not work.

When using the Manual Focus

When using the Digital Zoom

When the AF area has been set by using the cursor button

139

Page 139
Image 139
Panasonic DMCGF6KK owner manual Easily Optimizing the Brightness for a Specified Area, 139