Preparation

Changing the Lens

By changing the lens, you will increase your picture taking-options and further your enjoyment of the camera. Change the lens using the following procedure.

Check that the camera is turned off.

Change lenses where there is not a lot of dirt or dust. Refer to P326 when dirt or dust gets on the lens.

Attaching the lens

Preparations: Remove the lens rear cap from the lens.

If the body cap is fitted to the camera, remove it.

Align the lens fitting marks A and then rotate the lens in the direction of the arrow until it clicks.

Do not press the lens release button B when you attach a lens.

Do not try to attach the lens when holding it at an angle to the camera body as the lens mount may get scratched.

Be sure to remove the lens cap when recording.

Do not insert your fingers into the mount when the lens and body cap

are removed from the camera body.

To prevent dust or debris from adhering to internal parts of the camera body, fit the body cap or a lens to the mount on the camera body.

To prevent scratching of the contact points, fit the lens rear cap to the lens when it is unattached or fit the lens to the camera body.

It is recommended to attach the lens cap or attach the MC Protector (optional) to protect the lens surface when carrying. (P290)

21

Page 21
Image 21
Panasonic DMCGF6KK owner manual Changing the Lens, Attaching the lens, Preparations Remove the lens rear cap from the lens