Panasonic DMCGF6KK owner manual 237, Sending selected images Send Images Stored in the Camera

Wi-Fi/NFC

Sending selected images ([Send Images Stored in the Camera])

1Select the menu.

[Wi-Fi] > [New Connection]>[Send Images Stored in the Camera]>[Smartphone]

2Select [Via Network] or [Direct], and connect. (P259)

On your smartphone/tablet

When connecting with [Via Network]:

1Turn on the Wi-Fi function.

2Select the wireless access point you want to connect to, and set.

3 Start “Image App”.¢ (P227)

When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]:

1Start “Image App”.¢ (P227)

When connecting with [Manual Connection] in [Direct]:

1Turn on the Wi-Fi function.

2Select the SSID that matches the one displayed on the screen of this unit, and

then enter the password.

3Start “Image App”.¢ (P227)

¢A window indicating that the smartphone/tablet is connecting to the camera is displayed. If you are using an Android device, press the back key. If you are using an iOS device, close the window.

3Select a device you want to connect.

•When the connection is complete, the screen is displayed. To change the send setting, press [DISP.]. (P266)

4Select [Single Select] or [Multi Select].

•To change the setting or disconnect, press [Wi-Fi]. (P224)

[Single Select] setting 1 Select the picture.

2 Select [Set].

6HW

[Multi Select] setting
1 Select the picture. (repeat)
• The setting is canceled when the picture is selected
again.	2.

2Select [OK].

• The number of pictures that can be sent by [Multi Select] is limited.

•Confirmation screen is displayed. It is executed when [Yes] is selected.

237