Panasonic DMCGF6KK owner manual Attaching the Lens Hood

Preparation

Attaching the Lens Hood

When recording into strong backlight, irregular reflection may occur within the lens. The lens hood reduces the inclusion of unwanted light in the recorded images and lowers the drop in contrast. The lens hood cuts off excess lighting and improves the picture quality.

•The interchangeable lens (H-PS14042) does not have a lens hood.

To attach the lens hood (flower shape) that came with the interchangeable lens (H-FS1442A)

Hold the lens hood by placing your fingers as shown in the figure.

• Do not hold the lens hood in such a way that it will be bent.

1Align the fitting mark A on the short side of the lens hood with the mark on the tip of the lens.

2Turn the lens hood in the direction of the arrow until it clicks, and align the stop mark B on the long side of the lens hood with the mark on the tip of the lens.

To attach the lens hood that came with the interchangeable lens (H-FS45150)

1Align the fitting mark C on the lens hood with the mark on the tip of the lens.

2Turn the lens hood in the direction of the arrow until it stops, and align the stop mark D on the lens hood with the mark on the tip of the lens.

• When carrying, the lens hood can be temporarily attached in the reverse direction.

23