Axis Communications 230 MPEG-2 Product Description, Axis 230 Front, Axis 230 Rear Panel

AXIS 230 Product Description 9

Product Description

Read the following information to familiarize yourself with the AXIS 230, making particular note of where the connectors and indicators are located.

AXIS 230 - Front

Screw-in ceiling mount

Swivel head

Built-in zoom lens

The Status LED shows steady green for normal operation, or red for errors

The internal microphone

AXIS 230 - Rear Panel

Reset Button - Press to restore the factory default settings, as described on page 38.

Video Out - Standard BNC connector allowing direct monitoring of the cam- era’s image.

Terminal Block

Provides the physical interfaces to one transistor output, two digital inputs, RS-485 and GND. Used for connecting external devices typically associated with CCTV equipment. See also page 49.

RS-232 Serial Connector - For	Indicator LEDs - The Power LED shows steady
	green for normal operation, or flashes green or
connecting Pan/Tilt devices, etc.
	is unlit for a malfunction in the power supply.
RJ45 Network Connector -	It also flashes amber during a firmware
	upgrade. The Network LED flashes
10BaseT or 100BaseTX Ethernet.
	amber/green for 10/100Mbps network, or solid
	red for no network connection. An unlit indica-
	tor denotes no activity. The Audio indicator
	flashes green when audio is transmitted.

Audio in - Connects an external microphone or other audio device.

Power - connect the PS-K power adapter here.