Lenses and Advanced Focusing AXIS 2420 User’s Manual
56 Plane of Focus
The lens has rotational focus control that allows the focal length of the le ns t o be adj usted
manually. Depending on the chosen physical location for your camera, it is likely that
several planes of focus will exist throughout the full focusing depth of the unit;
consequently, the Status Indicat or is likely to display green - indicating a good level of
focus - several times throughout the full travel of the lens assembly.
Focusing Procedure
Before you begin:
With reference to the accompanying illustrations, follow the instructions below to ac hiev e
a good basic level of focus under stable conditions:
Important!
1. Power up the AXIS 2420 and then wait at least 10 seconds.
2. Turn the lens to its extreme Far-focus (F, ∞) position.
3. Enable the Focus Assistant. Using a suitably
pointed object, press and continue to hold
the Control Button - until the Status
Indicator flashes Yello w.
The Focus Assistant is now enabled with the
Status Indicator set to Focus Mode. The
AXIS 2420 now initiates a focusing
algorithm to regularly calculate the quality
of focus.
4. In order for the Focus Assistant to access the
full focusing range for your application
environment, turn the lens slowly to its
extreme Near-focus (N) position.
For the focusing algorithm to work efficiently, always ensure that there is minimal movement in the
camera’s field of view when focusing, as described below.
Do not press the Control Button for at least 10 seconds after powering up the unit, as this will cause the
AXIS 2420 to return to its factory default settings.
Control Button
Status Indicator Lens Assembly