AXIS 2420 User’s Manual Customizing Your Camera 61

Custom Web Pages
The AXIS 2420 contains a re-writable flash memory file system that allows some
directories and files to be changed by the root user, using FTP. This strictly non-supported
product functionality makes it possible for advanced users and application developers to
add their own Web pages, scripts, and other files to the Axis product.

Customizing Procedures

The existing Administration pages are stored in a compressed read-only area of the file
system. If you intend to try changing these pages, you must adhere strictly to the
instructions provided here and ensure that you DO NOT inadvertently change any files
other than those featured in this section. Failure to comply with this notice may render
your product unusable.
All files stored in the /etc/httpd/html directory are available through the product Web
server in the virtual directory /local/. The URL to resident pages in the /etc/httpd/html
directory is http://IP/local/<filename>.htm
You can change the html files as and when you like, but remember that the available flash
memory is limited. The number of times the memory can be written to is approximately 1
million.

Creating a New Home Page

Having created and stored your new custom Web pages in product memory, you then
proceed to assign one of these pages as your default Home page in the AXIS 2420, as
described below:
Caution!
1. Start a new FTP session to the AXIS 2420, by enter ing:
2. Type bin
3. Navigate your way to the appropriate directory, entering:
Adding a new Web page to your AXIS 2420 is not something that should be undertaken lightly. Remem-
ber: Axis does not support the personalization of product Web pages and strongly recommends that
inexperienced users DO NOT perform such modifications.
ftp <camera ip address>
cd /etc/httpd/conf/