AXIS Q1604-E Network Camera
Hardware Overview
SD Card Slot
An SD card (not included) can be used for local recording with removable storage. For more information, see Technical Specifications.
NOTICE
To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System Options > Storage > SD Card and click Unmount.
Control Button
The control button is used for:
•Enabling the Focus Assistant. Press and very quickly release the Control button.
•Resetting the product to factory default settings. See page 54.
•Connecting to an AXIS Video Hosting System service. See page 47. To connect, press and hold the button for about 1 second until the Status LED flashes green.
•Connecting to AXIS Internet Dynamic DNS Service. See page 47. To connect, press and hold the button for about 3 seconds.
LED Indicators
LED indicators in camera
LED | Color | Indication |
|
|
|
Network | Green | Steady for connection to a 100 Mbit/s network. Flashes for network activity. |
|
|
|
| Amber | Steady for connection to 10 Mbit/s network. Flashes for network activity. |
|
|
|
| Unlit | No network connection. |
|
|
|
Status | Green | Steady green for normal operation. |
|
|
|
| Amber | Steady during startup, during reset to factory default or when restoring settings. |
|
|
|
| Red | Slow flash for failed upgrade. |
|
|
|
Power | Green | Normal operation. |
|
|
|
| Amber | Flashes green/amber during firmware upgrade. |
|
|
|
Note
•The Status LED can be configured to flash while an event is active.
•The Status LED can be configured to be unlit during normal operation, or to flash only when the camera is accessed. To configure, go to Setup > System Options > LED settings. See the online help files for more information.
•The Status LED can be configured to flash for identifying the unit. This can be done under Setup > System Options >
Maintenance.
Status LED on housing (fan and heater)
Color | Indication |
|
|
Green | OK |
|
|
Flashing | Single flash: Heater error |
green | Double flash: Fan error |
| Triple flash: General error |
| Alarm events will be triggered through the camera’s input port. |
| See the User’s Manual, available on the CD provided with this product, or from www.axis.com |
| Contact your Axis reseller for information about spare parts and troubleshooting. |
|
|
10
