AXIS Q1604-E Network Camera
Setting Up the Product
Focus Assistant
Note
•The view in front of the camera should not be changed during focus adjustment (steps 5 and 6). If the camera is moved, or if a finger or other object is placed in front of the lens, steps 3 - 7 will have to be repeated.
•If movements in front of the camera cannot be avoided, the Focus Assistant should not be used.
•If the camera is mounted so that the Function button cannot be accessed, you can still use the Focus Assistant. Follow the instructions above but mount the camera after step 4, pressing the Function button instead and skip step 7.
To focus your network camera using the Focus Assistant, follow steps 1 - 3 on page 19 before you start with the steps below. See Hardware Overview, on page 6 .
1.Mount or place the camera so that it cannot be moved.
2.Loosen the zoom puller by turning it
3.Set the camera to its extreme
4.Press and quickly release the Function button. When the Status LED flashes green, the Focus Assistant is enabled.
If the Status LED flashes either red or amber before you are able to adjust the lens, skip to step 7 to exit the Focus Assistant and repeat steps 3 - 7. See the notes above. See Status LED Behavior for Focus Assistant, on page 11.
5.Gently turn the lens
6.Turn the lens slowly clockwise until the status indicator flashes green or amber (not red).
7.Retighten the focus puller.
8.Open the Live View page in the web browser and check the quality of the image.
9.Continue with steps 6 - 8 on page 19.
20
