Axis Communications 463001 user manual Hardware Overview Status LED Behavior for Focus Assistant

AXIS Q1604-E Network Camera

Hardware Overview

Status LED Behavior for Focus Assistant

Color

Green

Amber

Red

Indication

Focus Assistant is enabled

The lens is optimally adjusted

The camera has been moved, or an object has been inserted in front of the lens. Exit and restart the Focus Assistant.

The lens is less optimally adjusted.

The camera has been moved, or an object has been inserted in front of the lens. Exit and restart the Focus Assistant.

The lens is poorly adjusted.

Replacing the lens

It is possible to use optional lenses for the Axis product.

To replace the lens:

1.Disconnect the iris cable.

2.Unscrew the standard lens.

3.Attach and screw on the new lens.

Note

There is no need to restart the Axis product after changing the lens. However, the product must be restarted if you are interchanging between a P-iris, DC-Iris or fixed/manual iris lens. In order to set the focus and position the lens, the Axis product must be connected to the network.

To change the iris configuration:

1.Go to Setup > Video and Audio > Camera Settings. Iris configuration shows the current configured iris type.

2.Click Edit.

3.Select the installed iris lens from the drop-down list and click OK.

Note

For P-iris lenses not listed in the drop-down list, download the iris configuration file from www.axis.com

To upload and use the downloaded configuration file, click the Upload tab. Click Browse and select the configuration file. Click Upload. The installed iris lens should now be included in the Iris Selection drop-down list, select it and press OK. If you select a DC iris configuration file for a P-iris lens, an error message will appear below the iris configuration type in the Camera Settings page. For custom DC Iris lenses, select Generic DC Iris option.

11