AXIS 221 - Product Features 7
Power adapter connector - for connection of the
Power connector block - for connection of a power supply. See Power connections, on page 48 .
I/O terminal connector - The I/O terminal connector provides the physical interface to one solid state relay output, two digital
Network connector - The AXIS 221 connects to the network via a standard network cable, and automatically detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). This socket can also be used to power the AXIS 221 via PoE (Power over Ethernet). The camera also negotiates the correct power level when using PoE.
Serial number - This number is used during installation.
Reset button - Press this button to install the AXIS 221 using the AXIS Internet Dynamic DNS Service (see the installation guide), or to restore the camera to its factory default settings, as described in Resetting to the Factory Default Settings, on page 45.
LED indicators
After completion of the startup and self test routines, the
| Amber | Steady for connection to 10 Mbit/s network. Flashes for network activity. | |
Network |
|
| |
Green | Steady for connection to 100 Mbit/s network. Flashes for network activity. | ||
|
|
| |
| Unlit | No connection. | |
|
|
| |
| Green | Shows steady green for normal operation. Can be configured to flash green at intervals | |
|
| whenever the camera is accessed. See the online help for more information. | |
|
|
| |
Status | Amber | Shows steady amber during reset to factory default or when restoring settings. | |
| Red | Slow flash for failed firmware upgrade (see Emergency Recovery Procedure, on page 51). | |
|
|
| |
| Unlit | When configured for “no flash” on camera access. | |
|
|
| |
Power | Green | Normal operation. | |
|
| ||
Amber | Flashes green/amber during firmware upgrade. | ||
| |||
|
|
|
