Manuals / Brands / Photography / Security Camera / Axis Communications / Photography / Security Camera

Axis Communications M1034-W Advanced, Reset to Factory Default Settings

1 61

Download 61 pages, 3.02 Mb

AXIS M1034-W Network Camera

System Options

Advanced

Scripting

Scripting allows experienced users to customize and use their own scripts.

NOTICE

Improper use may cause unexpected behavior and loss of contact with the Axis product.

Axis strongly recommends that you do not use this function unless you understand the consequences. Axis Support does not provide

assistance for problems with customized scripts.

To open the Script Editor, go to System Options > Advanced > Scripting. It is recommended to create a backup ﬁle before

customizing the scripts. If a script causes problems, reset the product to its factory default settings, see

page 51

.

For more information, see www.axis.com/developer

File Upload

Files, for example web pages and images, can be uploaded to the Axis product and used as custom settings. To upload a ﬁle, go

to System Options > Advanced > File Upload.

Uploaded ﬁles are accessed through http://<ip address>/local/<user>/<file name> where<user> is the

selected user group (viewer, operator or administrator) for the uploaded ﬁle.

Plain Conﬁg

Plain Conﬁg is for advanced users with experience of Axis product conﬁguration. Most parameters can be set and modiﬁed from this

page. Help is available from the standard help pages.

To open Plain Conﬁg, go to System Options > Advanced > Plain Conﬁg.

Reset to Factory Default Settings

This will reset all parameters, including the IP address, to the factory default settings:

1. Disconnect power from the product.

2. Press and hold the Control button and reconnect power (see

Hardware Overview, on page 6

).

3. Keep the Control button pressed for about 15 seconds until the Status indicator ﬂashes amber.

4. Release the Control button. The process is complete after about 1 minute (when the Status indicator turns green). The

product has been reset to the factory default settings. The default IP address is 192.168.0.90

5. Re-assign the IP address.

It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance.

51

Contents

Main About this document Liability Intellectual Property Rights Equipment Modications Trademark Acknowledgments Safety Support Learn More! AXIS M1034-W Network Camera Table of Contents HardwareOverview .......................................... 6 AccessingtheProduct ....................................... 9 MediaStreams ............................................. 14 Page Page Hardw are Over view NOTICE page 42 page 41 Electromagnetic Compatibility (EMC) Hardw are Over view Technical Specications, on page 57 Access from a Browser Set the Root Password, on page 10 AXIS M1034-W Network Camera Access from the Internet NAT traversal (port mapping) for IPv4, on page 43 Set the Root Password Reset to Factory Default Settings, on page 51 The Live View Page Controls on the Live View Page page 12 Stream Proles, on page 19 AXIS Media Control viewer toolbar AXIS Media Control (AMC), on page 14 Simplex - speaker only mode PTZ Controls How to Stream H.264 MJPEG AXIS Media Control (AMC) Alternative Methods of Accessing the Video Stream Accessing Audio Streams Setting Up the Product Setting Up the Product Basic Setup Video Stream Pixel Counter Image Overlay, on page 21 Continuous Recording, on page 36 Stream Proles Camera Settings Image Appearance White Balance Exposure Settings View Area Overlay File Naming & Date/Time Formats Privacy Mask Date & Time, on page 40 Overlay Image Privacy Mask Audio Settings AMC Audio Controls, on page 12 Audio Modes AMC Audio Controls, on page 12 Audio Clips Default Viewer for Browsers Viewer Settings AXIS Media Control (AMC), on page 14 User Dened Links Light Buttons Output Buttons I/O Ports, on page 49 View Area, on page 20 Preset Positions page 27 page 32 File Naming & Date/Time Formats Guard Tour Advanced Controls page 27 Users, on page 38 page 13 Camera Tampering Motion Detection Setting Up an Action Rule, on page 33 Set Up Motion Detection Windows, on page 30 Motion Detection Parameters, on page 30 Set Up Motion Detection Windows Motion Detection Parameters Motion Detection Parameters Audio Detection Setting Up an Action Rule, on page 33 page 29 PIR Sensor Audio Detection, on page 31 Motion Detection, on page 29 Schedules, on page 34 Recurrences, on page 34 Camera Tampering, on page 29 Setting Up an Action Rule page 30 AXIS M1034-W Network Camera Recipients Schedules Recurrences Page Record ings Recordings page 36 Recording List, on page 36 page 33 Recording List Page Security Users ONVIF IP Address Filter HTTPS IEEE 802.1X Certicates Audio Support Audio Settings, on page 22 DNS Conguration, on page 42 Date & Time File Naming & Date/Time Formats Network Basic TCP/IP Settings Hardware Overview, on page 6 Advanced TCP/IP Settings page 38 Wireless Page Certicates, on page 47 IEEE 802.1X, on page 39 SOCKS QoS (Quality of Service) SMTP (email) SNMP HTTPS, on page 38 UPnP RTP/H.264 Storage Connectors, on page 6 Network Share Ports & Devices I/O Ports Support Troubleshooting, on page 52 Support Overview System Overview Logs & Reports Advanced Scripting Hardware Overview, on page 6 page 51 NOTICE Page Symptoms, Possible Causes and Remedial Actions Date & Time, on page 40 NAT traversal (port mapping) for IPv4, on page 43 Performance Considerations, on page 60 AXIS Media Control (AMC), on page 14 Emergency Recovery Procedure, on page 52 Internet Explorer only Overlay Image Settings Page Page Page Connectors 1 2 3 4 Performance Considerations