Axis Communications M1034-W user manual Events

AXIS M1034-W Network Camera

Events

Events

The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.

Available Action Rule triggers and conditions include:

•Detectors

-Audio Detection — trigger the rule when audio is detected, see Audio Detection, on page 31.

-Motion Detection — trigger the rule when motion is detected, see Motion Detection, on page 29.

-PIR — trigger the rule when the PIR sensor detects motion, see PIR Sensor, on page 31.

-Tampering — trigger the rule when tampering is detected, see Camera Tampering, on page 29.

•Hardware

-Network — trigger the rule if network connection is lost or restored.

•Input Signal

-Digital Input Port — trigger the rule when an I/O port receives a signal from a connected device, see I/O Ports, on page 49.

-Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on the Live View Page, on page 11. This can for example be used to validate actions during product installation and configuration.

•PTZ

-Moving — trigger the rule when the camera view moves due to a PTZ operation. This can for example be used as an additional condition to prevent an action rule triggered by motion detection to record video while the camera view moves due to a PTZ operation.

-Preset Reached — trigger the rule when the camera stops at a preset position. This can be for example be used with the Send Images action to upload images from the preset position.

•Storage

-Available — trigger the rule when the storage device is unmounted or removed. This can for example be used to send maintenance notifications.

-Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be overwritten to prevent the storage device from becoming full.

-Locked — trigger the rule if the storage device is locked (write protected).

•System

-System Initializing — trigger the rule when the product is being started. This can for example be used to send a notification when the product restarts.

•Time

-Recurrence — trigger the rule periodically, see Recurrences, on page 34. This can for example be used to upload an image every 5 minutes.

-Use Schedule — trigger the rule according to the selected schedule, see Schedules, on page 34.

Available actions include:

• Activate Light — turn the built-in light on or off.

32